

胡曉
電氣工程及其自動化系,講師
1985年生,于2006年和2009年在西安交通大學獲得電氣工程及其自動化專業的學士及碩士學位。碩士論文題目“高頻局部放電檢測小波閾值去噪的最優參數選取方法研究”。2009年獲英國工程與物理科學研究委獎學金資助到英國思克萊德大學念博士,于2014年獲得電子與電氣工程博士學位,博士論文題目“高壓電纜中的局部放電的有限差分時域法模擬”。自碩士以來一直從事電力設備局部放電方面的研究。在國內外重要學術期刊和會議上以第一作者和共同作者發表14篇研究論文,其中SCI收錄3篇,EI收錄4篇。作為第二申請人獲批授權美國專利1項。作為參與人獲2012年廣東電網公司科技進步一等獎“大型發電機局部放電檢測抗干擾關鍵技術研究”。目前的主要研究興趣是電力設備絕緣的高頻測試與診斷、局部放電的智能傳感、暫態電磁干擾測量。
Xiao Hu
Lecturer, Electrical Engineering College
Xiao Hu was born in 1985, Guizhou, China. He graduated from Xi'an Jiaotong University with a B.Sc. degree and a M.Sc. degree in electrical engineering in 2006 and 2009, respectively. He received his Ph.D. degree from the University of Strathclyde, Glasgow in 2014 for research on FDTD modeling of partial discharge in high voltage cables. He is currently a lecturer in Guizhou University, China and his research includes partial discharge measurement and modeling.
教育經歷
2009/10-2014/09,University of Strathclyde, Glasgow,Dept. of EEE,PhD
2006/09-2009/06,西安交通大學,3522集團新網站,碩士
2002/09-2006/07,西安交通大學,3522集團新網站,本科
工作經歷
2016/11 - 至今,貴州大學,3522集團新網站,講師
2014/10 - 2015/09,University of Strathclyde, Glasgow,Dept. of EEE,Research Assitant
科研經歷
(1)貴州省教育廳青年科技成長項目,黔教合KY字[2017]102,交聯聚乙烯電纜中的局部放電信號的傳遞函數研究,2017/11-2020/10,在研,主持。
(2)貴州大學引進人才科研項目,貴大人基合字(2016)09號,不同物理條件下局部放電的仿真研究,2017/01-2019/12,在研,主持。
(3)英國能源與氣候變化部(DECC)資助項目,UoS8555,高壓直流電纜在線監測儀(OLPD-HVDC),2013/10-2015/09,已結題,參加。
(4)英國工程與物理科學研究委(EPSRC)資助項目,EP/G029210/1,電纜狀態在線監測系統中的知識挖掘 -絕緣劣化和老化診斷,2009/06-2012/09,已結題,參加。
(5)廣東電力科學研究院橫向科研項目,大型水輪發電機局部放電檢測的抗干擾問題研究,2006/12-2008/10,已結題,參加。
論文&專利
[1] E. Corr, A. Reid, X. Hu, W. H. Siew, M. Zhu, M. Judd, M. Seltzer-Grant and R. Giussani. “Partial discharge testing of defects in dielectric insulation under DC and voltage ripple conditions”. CIGRE Science & Engineering, N?11:117-125, June 2018.
[2] X. Hu, W. H. Siew, M. Judd and X. Peng. “Transfer function characterization for HFCTs used in partial discharge detection”. IEEE Transactions on Dielectrics and Electrical Insulation, 24(2):1088-1096, April 2017.
[3] M. Judd, W. H. Siew, X. Hu, E. Corr et al. “Partial discharges under HVDC conditions”. Euro TechCon 2015,pages 1-19, Warwickshire, UK, Dec. 2015.
[4] M. Seltzer-Grant, R. Giussani, W. H. Siew, E. Corr, X. Hu, M. Zhu et al. “Laboratory and field partial dischargemeasurement in HVDC power cables”. 9th International Conference on Insulated Power Cables (Jicable’15), pages1-6, Versailles, France, June 2015.
[5] X. Hu, A. J. Reid, W. H. Siew and M. D. Judd. “FDTD modeling of fast transient currents in high voltagecables”. 2012 IEEE International Power Modulator and High Voltage Conference (IPMHVC2012), pages 260-263,San Diego, CA, June 2012.
[6] R. M. Harris,X. Hu, M. D. Judd and P. J. Moore. “Detection and location of arcingfaults in distributionnetworksusing a non-Contactapproach”. 2012 IEEE International Power Modulator and High Voltage Conference (IPMHVC2012), pages 583-586,San Diego, CA, June 2012.
[7] A. J. Reid, X. Hu, M. D. Judd andW. H. Siew. “Defect investigation in medium-voltage EPR cable”. 2012 IEEE International Symposium on Electrical Insulation (ISEI2012), pages323-326,San Juan, PR, June 2012.
[8] A. J. Reid, X. Hu, M. D. Judd and W. H. Siew. “Defect location and characterization in an EPR MV cable usingTDOA and thermal techniques”. In Proceedings of XVII International Symposium on High Voltage Engineering(ISH2011), pages 1094-1098, Hannover, Germany, Aug. 2011.
[9] A. J. Reid, X. Peng, X. Hu, M. D. Judd, W. H. Siew, C. Zhou and D. M. Hepburn. “Comparison of partialdischarge characteristics from insulation defects in 11kV EPR cable”. In Proceedings of XVII InternationalSymposium on High Voltage Engineering (ISH2011), pages 866-871, Hannover, Germany, Aug. 2011.
[10] X. Hu, M. D. Judd and W. H. Siew. “A study of PD location issues in GIS using FDTD simulation”. 45th International Universities Power Engineering Conference (UPEC), pages 1-5, Cardiff, Wales, Aug.-Sep. 2010.
[11] 徐陽,胡曉,楊楚明,張征平,喇元.“發電機局部放電甚高頻在線監測現場試驗分析”.高壓電器,2009,45(2):48-52.
[12] Yang Xu, Xiao Hu, Yuan La, Zhengping Zhang and Chuming Yang. Online partial discharge monitoring system of generator and method thereof, 2012.09.18, US 8,271,213 B2. (美國專利)
聯系方式
地址:貴州省貴陽市花溪區貴州大學西區電工樓402